The manufacturer of Large-caliber Carbon Steel Pipe Fitting Tee

　　The Large-caliber Carbon Steel Pipe Fitting Tee is used as a pipe fitting at the branch of the pipeline. In terms of seamless pipe manufacturing three links, there are two kinds of technology commonly used at present: hydraulic bulging and hot pressing.

　　Hot pressing forming: three pass hot pressing is a tube billet larger than three through diameter, compressed into a diameter of three through a hole in the part of a stretch branch; the tube is heated and placed in a forming die and loaded into a drawing die; the tube is compressed in radial direction under the action of pressure. The middle metal flows to the branch pipe and forms a branch pipe under the stretching of the die. The whole process is formed by the radial compression of the billet and the drawing process of the branch. Unlike the hydraulic Large-caliber Carbon Steel Pipe Fitting Tee, the metal of the hot-pressed Large-caliber Carbon Steel Pipe Fitting Tee branch is compensated by the radial motion of the billet, so it is also called the radial compensation process. Due to the use of heating to suppress Large-caliber Carbon Steel Pipe Fitting Tee, the equipment tonnage required for material forming is reduced. The three - pass hot press is suitable for the material with wide adaptability to low carbon steel, alloy steel and stainless steel, especially for the three through thick diameter and tube wall, which is usually used in this forming process.