Hebei Shengtian pipe fittings Group Co., Ltd. specializes in High press tee

　　The shape of high press tee, cross, elbow and other small-size pipe fittings is relatively complex, so it should be manufactured by die forging process. The blank used for die forging shall be rolled sections such as bars, thick walled tubes or plates. When using ingot as raw material, the ingot should be rolled into bar in advance or used as die forging blank after forging, so as to eliminate the defects such as segregation and porosity in ingot.

　　After being heated, the blank is put into the die for forging, and the pressure makes the metal flow and fill the die cavity; if there is flash in the blank after die forging, the process of punching off the remaining flash material is required to complete all the die forging work.

　　The High press tee produced by Hebei Shengtian pipe fittings Group Co., Ltd. can be customized according to the drawing requirements. If you have any questions, please send us email: sale@stpipefitting.cn