Wide application of pipe fittings cap

　　The pipe fittings cap is made of carbon steel, stainless steel, alloy steel, etc. Application: pipe fittings welded on pipe fittings cap or installed on the external thread of pipe fittings cap. It is used to close the pipeline and has the same function as the pipe plug. The form of blind plate is similar, but the blind plate can be removed for sealing, while the pipe fittings cap can not be removed.

　　Under normal circumstances, ASTM A234 Wpb Carbon Steel Large-caliber Pipe Fittings Cap is often used at both ends of the pressure vessel. In addition, the use of the end part force of the pipeline which can be used for sealing also belongs to a relief part of the pipe fittings. Moreover, pipe fittings cap has many forms of use. It is also widely used.

　　The elliptical pipe fittings cap is a pressure vessel accessory, and in the pipeline it uses the blue disk of Biffa. At the end of the pipeline, we will use pipe fittings cap, which has the same effect as the blind plate. We need to seal the pipe. If the pipe fittings cap is welded, it can't be removed, but the blind plate can be removed. With blinds he can better clean up the material in the pipe. When we use the pipe fittings cap, we need to debug it first, so as to prevent some dangers when we use it. When the pipe fittings cap is in use, its drawing die should be good, and the vent hole of the upper die should not be blocked.